Robe ROBIN Pointe Specifikace stáhnout pdf (Strana 16)

3.8 Wireless DMX operation

The wireless version of the Robin Pointe is equipped with the Lumen Radio CRMX module and antenna for

receiving DMX signal. CRMX module operates on the 2.4 GHz band.

The item " Wireless " from the menu "DMX Input" allows you to activate receiving of wireless DMX (Personal-

ity--> DMX Input -->Wireless.). First two options from the "DMX Input" menu are stated in DMX chart as well

(channel Power/Special functions , range of 10-19 DMX). If DMX input option is changed by DMX command,

the change is permanently written into xture´s memory.

DMX range of 10-19 switching xture to the wired/wireless operation is active only during rst 10 sec-

onds after switching the xture on.

After switching the xture on, the xture checks both modes of receiving DMX in the following order:

1. For the rst ve seconds, the xture receives DMX signal from the wired input. If the Power/Special functions

channel is set at some DMX input option, the xture will receive DMX value according to this option. If DMX input

option is set to the wired input , this option is saved and checking procedure is nished. If DMX input option is

not set, the xture continues next 5 seconds in scanning wireless DMX signal-see point 2.

2. For the next 5 seconds the xture receives wireless DMX signal and again detects if the Power/Special

functions channel is set at some DMX input option, if not, the xture will take option which is set in the xture

menu "DMX Input".

To link the xture with DMX transmitter.

The xture can be only linked with the transmitter by running the link procedure at DMX transmitter .

After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “Wireless State“ (Information

-->Wireless State).

To unlink the xture from DMX transmitter.

The xture can be unlinked from receiver via the menu item “ Unlink Wireless Adapter“ (Information--> Wireless

State --> Unlink Wireless Adapter.).

Note: If the option "Wireless In/XLR Out" is selected (Personality--> DMX Input -->Wireless In/XLR Out), the

xture receives wireless DMX and sends the signal to its wired DMX output. The xture behaves as " Wire-

less/Wired" adapter.

Example:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Žádné komentáře

Robe ROBIN Pointe Specifikace Strana 16